User's Manual

Table 7: SLR 5000 Series Repeater Specifications
Parameter Specifications
VHF UHF
Input Power (All Modulations)
Standby (AC Line 117 V/220 V) 0.18 A/0.25 A
50 W Transmit at Rated Power
(AC Line 117 V/220 V)
1.5 A/0.9 A
Standby (13.6 VDC) 0.73 A
50 W Transmit at Rated Power (13.6 VDC) 9.5 A
Frequency Reference
Internal Frequency Stability (PPM) ±0.5 PPM (temperature)
External Reference Capable Yes
Frequency Bands
Electronic Bandwidth 136–174 MHz UHF R1, 400–470 MHz
UHF R2, 450–527 MHz
Receiver
Selectivity 25 kHz/12.5 kHz (TIA603D) 83 dB/55 dB 80 dB/55 dB
Selectivity 25 kHz/12.5 kHz (TIA603) 83 dB/68 dB 80 dB/55 dB
Selectivity 25 kHz/12.5 kHz (ETSI) 70 dB/63 dB
Sensitivity (12 dB SINAD) 0.22 uV
Sensitivity (5% BER) 0.22 uV
Intermodulation Rejection (TIA603D) 82 dB
Intermodulation Rejection (ETSI) 73 dB
Spurious Rejection (TIA603D) 95 dB
Spurious Rejection (ETSI) 90 dB
Conducted Spurious Emissions -57 dBm
Audio Distortion <1%
Audio Response Per TIA/ETSI
FM Hum and Noise 25 kHz/12.5 kHz -50 dB/-45 dB
Transmitter
Rated Output Power (Continuous Duty) 1–50 W
Intermodulation Attenuation 40 dB
Adjacent Channel Power 25 kHz/12.5 kHz 78 dB/62 dB
Modulation Fidelity (4FSK) FSK Error 5%, FSK Magnitude 1%
Wideband Noise (1 MHz) @ Rated Pout -152 dBc/Hz
Table continued…
1
Typical performance under the following conditions (when applicable): Battery charging disabled
and nominal VSWR conditions (VSWR <1.5:1)
MN001436A01-AD
Chapter 1: SLR 5000 Series Repeater
42 Send Feedback