User Manual

Advanced Features

English

If your radio is set to Silent, it does not display any audio or

visual indicators during Emergency mode, or allow any received

calls to sound through the radio’s speaker, until you press the

PTT button to initiate the call.

If your radio is set to Silent with Voice, it does not display any

audio or visual indicators during Emergency mode, but allow

incoming calls to sound through the radio’s speaker. The

indicators only appear once you press the PTT button to initiate,

or respond to, the call.

Sending an Emergency Alarm with Voice to

This feature allows you to send an Emergency Alarm to a group

of radios. Your radio’s microphone is automatically activated,

allowing you to communicate with the group of radios without

pressing the PTT button.

This activated microphone state is also known as “hot mic”.

If your radio has Emergency Cycle Mode enabled, repetitions of

hot mic and receiving period are made for a programmed

duration.

NOTE: During Emergency Cycle Mode, received calls sound

through the radio’s speaker.

If you press the PTT button during the programmed receiving

period, you will hear a prohibit tone, indicating that you should

release the PTT button. The radio ignores the PTT press and

remains in Emergency mode.

NOTE: If you press the PTT button during hot mic, and

continue to press it after the hot mic duration expires,

the radio continues to transmit until you release the

PTT button.

Procedure:

1 Press the programmed Emergency On button.

