User Manual

Advanced Features
English
54
10 Press d to end the call.
If deaccess code was not preconfigured in the Contacts list,
the first line of the display shows De-Access Code:. The
second line of the display shows a blinking cursor. Enter the
deaccess code and press
c to proceed. The radio returns
to the previous screen.
11 The DTMF tone sounds and the display shows Ending
Phone Call.
12 If successful:
A tone sounds and the display shows Phone Call Ended.
Your radio returns to the Call Phone screen.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Steps
10 and 11 or wait for the telephone user to end the call.
When you press PTT button while in the Phone Contacts
screen, a negative indicator tone sounds and the display shows
Press OK to Place Phone Call.
When the telephone user ends the call, a tone sounds and the
display shows Phone Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
During channel access, press
d to dismiss the call attempt
and a negative indicator tone sounds. Your radio returns to the
Call Phone screen.
During the call, when you press One Touch Access button with
the deaccess code preconfigured or enter the deaccess code
as the input for extra digits, your radio attempts to end the call.
During channel access and access/deaccess code or extra
digits transmission, your radio responds to On/Off/Volume
Control Knob and Channel Selector Knob only. A tone sounds
for every invalid input.
The access or deaccess code cannot be more than 10
characters.