User Manual

Advanced Features
English
53
Making a Phone Call from Contacts
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
3 ^ or v to the required subscriber alias or ID.
OR
^ or v to Manual Dial and press c to select.
^ or v to Phone Number and press c to select.
The first line of the display shows Phone Number:. The
second line of the display shows a blinking cursor. Use the
keypad to enter a telephone number.
4 Press c to select.
If the entry selected is empty, a negative indicator tone
sounds and the display shows Phone Call Invalid #.
5 ^ or v to Call Phone and press c to select.
If the access code was not preconfigured in the Contacts
list, the first line of the display shows Access Code:. The
second line of the display shows a blinking cursor. Enter the
access code and press c to proceed.
6 The first line of the display shows Calling. The second line
of the display shows the subscriber alias or ID, and the
Phone Call icon.
7 If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user. The first line of the display shows the
subscriber alias or ID, and the RSSI icon. The second line of
the display shows Phone Call and the Phone Call icon.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
8 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
9 Press the PTT button to talk and release it to listen. The
RSSI icon disappears during transmission.
To enter extra digits, if requested by the Phone Call:
The first line of the display shows Extra Digits:. The
second line of the display shows a blinking cursor. Enter the
extra digits using the keypad and press
c to proceed. The
DTMF tone sounds and the radio returns to the previous
screen.
OR
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
