User Manual

Making and Receiving Calls
English
37
5 If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user. The first text line shows the subscriber alias.
The Phone Call icon remains in the top right corner.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
7 Press the PTT button to talk and release it to listen.
To enter extra digits, if requested by the Phone Call:
Enter the extra digits using the keypad and press
c to
proceed. The DTMF tone sounds and the radio returns to
the previous screen.
8 Press d to end the call.
If de-access code was not preconfigured in the Contacts list,
the display shows De-Access Code:. Enter the de-access
code and press
c to proceed. The radio returns to the
previous screen.
OR
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
9 The DTMF tone sounds and the display shows Ending
Phone Call.
10 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 8
or wait for the telephone user to end the call.
When you press PTT button while in the Phone Contacts
screen, a tone sounds and the display shows Press OK to
Place Call.
When the telephone user ends the call, a tone sounds and the
display shows Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
During channel access, press
d to dismiss the call attempt
and a tone sounds.
During the call, when you press One Touch Access button with
the deaccess code preconfigured or enter the deaccess code
as the input for extra digits, your radio attempts to end the call.
The access or de-access code cannot be more than 10
characters.