User Manual

Making and Receiving Calls
English
32
5 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
6 If the Channel Free Indication feature is enabled, you hear a
short alert tone the moment the target radio releases the
PTT button, indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 You hear a short tone. The display shows Call Ended.
Making a Phone Call with the One Touch Access
Button
Procedure:
1 Press the programmed One Touch Access button to make
a Phone Call to the predefined alias or ID.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
If the access code was not preconfigured in the Contacts
list, the display shows Access Code:. Enter the access
code and press c to proceed.
2 The LED lights up solid green. The Phone Call icon appears
in the top right corner. The first text line shows the
subscriber alias. The second text line displays the call
status.
3 If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user. The first text line shows the subscriber alias.
The Phone Call icon remains in the top right corner.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5 Press the PTT button to talk and release it to listen.
To enter extra digits, if requested by the Phone Call:
Enter the extra digits using the keypad and press
c to
proceed. The DTMF tone sounds and the radio returns to
the previous screen.
6 Press d to end the call.
If de-access code was not preconfigured in the Contacts list,
the display shows De-Access Code:. Enter the de-access
code and press
c to proceed. The radio returns to the
previous screen.
OR
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
