User Manual

Making and Receiving Calls
English
28
Phone Call as an All Call
Procedure:
When you receive a Phone Call as an All Call:
1 The Phone Call icon appears in the top right corner. The
display shows All Call and Phone Call.
2 Press the PTT button to talk and release it to listen.
3 Press d to end the call.
The display shows Ending Phone Call.
4 If successful:
A tone sounds and the display shows All Call and
Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 3
to end the call.
If Phone Call capability is not enabled in your radio, the display
shows
Unavailable and your radio mutes the call. Your radio
returns to the previous screen when the call ends.
NOTE: When you receive a Phone Call as an All Call, you can
respond to the call or end the call, only if an All Call
type is assigned to the channel.
Making a Radio Call
After selecting your channel, you can select a subscriber alias
or ID, or group alias or ID by using:
• The Channel Selector Knob
• A programmed One Touch Access button
• The programmed number keys – This method is for Group,
Private and All Calls only and is used with the keypad (see
Making a Group, Private or All Call with the
Programmable Number Key on page 33).
• A programmable button – This method is for Phone Calls only
(see Making a Phone Call with the Programmable Phone
Button on page 34).
• The Contacts list (see Contacts Settings on page 50)
• Manual Dial (via Contacts) – This method is for Private Calls
only and is dialed using the keypad (see Making a Private
Call from Contacts on page 52, Making a Private Call from
Contacts on page 52, and Making a Call with the
Programmable Manual Dial Button on page 36).
NOTE: Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key OR the
same Key Value and Key ID as your radio are able to
unscramble the transmission.
