User Manual

Advanced Features
English
99
NOTE: At Step 4, you can also use < or > to change the
selected option.
Setting the Squelch Level
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
Press the programmed Squelch button to toggle squelch level
between normal and tight.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Squelch and press c to select.
5 The display shows Tight and Normal. ^ or v to the
required setting and press
c to enable. 9 appears besides
selected setting.
6 Screen returns to the previous menu.
NOTE: At Step 4, you can also use
< or > to change the
selected option.
Turning the Introduction Screen On or Off
You can enable and disable the Introduction Screen if needed.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Intro Screen and press c to select.
5 Press c to enable Introduction Screen. The display shows
9 beside Enabled.
OR
Press
c to disable Introduction Screen. The 9 disappears
from beside Enabled.
NOTE: At Step 4, you can also use
< or > to change the
selected option.

