User's Guide

Keypad Microphone Features
English
75
Initiating Remote Monitor by Manual Dial
Procedure:
1 g to access the menu.
2 b or c to Contacts and press g to select.
3 b or c to Manual Dial and press g to select.
4 b or c to Radio Number and press g to select.
5 If there was previously dialed ID, the ID appears along with
a blinking cursor. Use the keypad to edit the ID. Press g to
select.
OR
Key in the subscriber alias or ID and press g .
6 b or c to Remote Mon. and press g to select.
7 The display shows transitional mini notice, indicating the
request is in progress. The green LED lights up.
8 Wait for acknowledgment.
9 If successful, a positive indicator tone sounds and the
display shows positive mini notice. Your radio starts playing
audio from the monitored radio for a programmed duration
and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and
the LED turns off.
OR
If unsuccessful, the radio sounds a negative indicator tone
the display shows negative mini notice.
Making a Private Call by Manual Dial
Procedure:
1 g to access the menu.
2 b or c to Contacts and press g to select.The
entries are alphabetically sorted.
3 b or c to Manual Dial and press g to select.
4 b or c to Radio Number and press g to select.
5 If there is a previously dialed subscriber ID, the ID appears
along with a blinking cursor.
Use the keypad to edit the subscriber ID.
OR
Use the keypad to enter a new subscriber ID.
6 Press the PTT button to make the call. The green LED lights
up. The display shows the destination alias.
7 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.


NAG.book Page 75 Monday, March 25, 2013 3:20 PM