User's Guide
Table Of Contents
- English
- Declaration of Conformity
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Getting Started
- Identifying Radio Controls
- Identifying Status Indicators
- Receiving and Making Calls
- Advanced Features
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Analog Status Update
- Privacy
- Analog Scrambling
- Multi-Site Controls
- Security
- Lone Worker
- Notification List
- Auto-Range Transponder System (ARTS)
- Over-the-Air Programming (OTAP)
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Power Level
- Adjusting the Display Brightness
- Turning Horns/Lights On or Off
- Setting the Squelch Level
- Turning the LED Indicators On or Off
- Language
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Voice Announcement
- Analog Mic AGC (Mic AGC-A)
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Accessing General Radio Information
- Keypad Microphone Features
- Using the Keypad
- Additional Advanced Features
- Selecting a Zone by Alias Search
- Initiating a Radio Check by Manual Dial
- Initiating Remote Monitor by Manual Dial
- Making a Private Call by Manual Dial
- Making a Group, Private or All Call with the Programmable Number Key
- Making a Group, Private or All Call by Alias Search
- Viewing an Entry in the Scan List by Alias Search
- Editing the Scan List by Alias Search
- Storing an Alias or ID from a Call List
- Making a Call Alert by Manual Dial
- RSSI Values
- Dual Tone Multi Frequency (DTMF)
- Security
- Password Lock Features
- Front Panel Configuration (FPC)
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Notes
- Français canadien
- Déclaration de conformité
- Consignes de sécurité importantes
- Version logicielle
- Droit d'auteur et copie du logiciel
- Pour commencer
- Identification des commandes de la radio
- Description des indicateurs d'état
- Réception et acheminement d'appels
- Fonctions avancées
- Vérification de la radio
- Écoute de bruits ambiants
- Listes de balayage
- Balayage
- Balayage par vote
- Réglages des contacts
- Réglages de l'indicateur d'appel
- Fonctions du Journal des appels
- Fonction Avertissement d'appel
- Fonction d'urgence
- Mettre à jour l'état analogique
- Cryptage
- Brouillage analogique
- Réglages multisite
- Sécurité
- Travailleur solitaire
- Liste de notification
- ARTS (Auto-Range Transponder System)
- Programmation par radiocommunication (OTAP)
- Utilitaires
- Activer ou désactiver les tonalités et les avertissements de la radio
- Régler l'écart de volume des tonalités d'avertissement
- Activer ou désactiver la tonalité d'autorisation
- Activer et désactiver la tonalité d'alerte de mise sous tension
- Régler le niveau de puissance
- Régler la luminosité de l'écran
- Activer ou désactiver Avert./phares
- Régler le niveau du silencieux
- Activer ou désactiver les voyants DEL
- Langue
- Activer ou désactiver la fonction de transmission vocale (VOX)
- Annonce vocale
- CGA Mic. analogique (Mic. CGA-A)
- Contrôle de gain automatique de microphone numérique (Mic. CGA-D)
- Audio intelligent
- Accéder aux renseignements généraux sur la radio
- Fonctions du microphone à clavier
- Utilisation du clavier
- Autres fonctions avancées
- Sélection d'une zone à l'aide de la recherche d'alias
- Exécution d'une vérification radio à l'aide de la numérotation manuelle
- Exécution de la fonction Écoute ambiance à l'aide de la numérotation manuelle
- Pour faire un appel privé à l'aide de la numérotation manuelle
- Faire un appel de groupe, privé ou général à l'aide de la touche numérique programmable
- Pour faire un appel de groupe, privé ou général à l'aide de la recherche d'alias
- Consulter une entrée de la liste de balayage à l'aide de la recherche d'alias
- Modification de la liste de balayage à l'aide de la recherche d'alias
- Enregistrer un alias ou un ID de la liste d'appel
- Envoi d'un avertissement d'appel à l'aide de la numérotation manuelle
- Valeurs RSSI
- Multifréquence à deux tonalités (DTMF)
- Sécurité
- Fonctions de verrouillage par mot de passe
- Configuration du panneau avant (FPC)
- Accessoires
- Annexe : Utilisation de la radio maritime dans la gamme de fréquence VHF
- Garantie limitée
- PRODUITS DE TÉLÉCOMMUNICATIONS MOTOROLA
- I. PROTECTION ASSURÉE PAR LA PRÉSENTE GARANTIE ET DURÉE DE CELLE-CI :
- II. CONDITIONS GÉNÉRALES :
- III. DROITS PRÉVUS PAR LES LOIS PROVINCIALES :
- IV. ENTRETIEN COUVERT PAR LA GARANTIE :
- V. CE QUI N'EST PAS COUVERT PAR LA PRÉSENTE GARANTIE :
- VI. DISPOSITIONS RELATIVES AUX BREVETS ET AUX LOGICIELS :
- VII. LOI APPLICABLE :
Advanced Features
English
46
4 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
5 Release the PTT button to listen. When the emergency
initiating radio responds, the green LED blinks. You see the
Group Call icon, the group alias or ID, and transmitting radio
alias or ID on your display.
6 Your radio displays the Alarm List.
Emergency voice can only be transmitted by the emergency
initiating radio. All other radios (including the emergency
receiving radio) transmit non-emergency voice.
Sending an Emergency Alarm
This feature allows you to send an Emergency Alarm, a
non-voice signal, which triggers an alert indication on a group of
radios.
Procedure:
1 Press the programmed Emergency On button or the
Emergency footswitch.
2 The display shows Tx Alarm and the destination alias. The
green LED lights up and the Emergency icon appears.
OR
The display shows Tx Telegram and the destination
alias. The green LED lights up and the Emergency icon
appears.
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the green LED blinks. The
display shows Alarm Sent.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a tone sounds and the display shows
Alarm Failed.
4 Radio exits the Emergency Alarm mode and returns to the
Home screen.
If your radio is set to Silent, it does not display any audio or
visual indicators during Emergency mode.
NAG.book Page 46 Monday, March 25, 2013 3:20 PM