User's Guide

Advanced Features
English
45
In addition, each alarm has the following types:
• Regular – Radio transmits an alarm signal and shows audio
and/or visual indicators.
• Silent – Radio transmits an alarm signal without any audio or
visual indicators. Radio receives calls without any sound
through the radio’s speaker, until you press the PTT button to
initiate the call.
• Silent with Voice – Radio transmits an alarm signal without
any audio or visual indicators, but allow incoming calls to
sound through the radio’s speaker.
Only one of the Emergency Alarms above can be assigned to
the programmed Emergency button or the Emergency
footswitch.
Receiving an Emergency Alarm
Procedure:
1 The emergency icon appears, a tone sounds, the red LED
blinks, and the radio displays the Alarm List if there is more
than one alarm listed. The emergency caller aliases are
listed.
b or c to the required alias and press g to
view more details.
Press
g again to view your action options.
OR
The emergency icon appears, a tone sounds, the red LED
blinks, and the radio displays the emergency caller alias
Press
g to view more details. Press g again to view
your action options.
2 Press g and select Yes to exit the Alarm List.
To revisit the Alarm List, press
g to access the menu and
select Alarm List.
Responding to an Emergency Alarm
Procedure:
When receiving an Emergency Alarm:
1 In the Alarm List, b or c to the required alias.
2 If the Channel Free Indication feature is enabled, you
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
3 Press PTT button to transmit non-emergency voice to the
same group that the Emergency Alarm was targeted to. The
green LED lights up. Your radio remains in the Emergency
mode.


NAG.book Page 45 Monday, March 25, 2013 3:20 PM