User's Guide

Advanced Features
English
27
Remote Monitor
Use the Remote Monitor feature to turn on the microphone of a
target radio (subscriber IDs only). No audible or visual indication
is given to the target radio. You can use this feature to monitor,
remotely, any audible activity surrounding the target radio.
Your radio must be programmed to allow you to use this
feature.
Initiating Remote Monitor
Procedure:
Use the programmed Remote Monitor button.
1 Press the programmed Remote Monitor button.
2 b or c to the required subscriber alias or ID and press
g to select.
3 The display shows transitional mini notice, indicating the
request is in progress. The green LED lights up.
4 Wait for acknowledgment.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice. Your radio starts playing
audio from the monitored radio for a programmed duration
and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and
the LED turns off.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
OR
Procedure:
Use the menu.
1 g to access the menu.
2 b or c to Contacts and press g to select.
3 b or c to the required subscriber alias or ID and press
g to select.
4 b or c to Remote Mon. and press g to select.
5 The display shows transitional mini notice, indicating the
request is in progress. The green LED lights up.
6 Wait for acknowledgment.

NAG.book Page 27 Monday, March 25, 2013 3:20 PM