User's Guide
Table Of Contents
- English
- Declaration of Conformity
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Getting Started
- Identifying Radio Controls
- Identifying Status Indicators
- Receiving and Making Calls
- Advanced Features
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Analog Status Update
- Privacy
- Analog Scrambling
- Multi-Site Controls
- Security
- Lone Worker
- Notification List
- Auto-Range Transponder System (ARTS)
- Over-the-Air Programming (OTAP)
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Power Level
- Adjusting the Display Brightness
- Turning Horns/Lights On or Off
- Setting the Squelch Level
- Turning the LED Indicators On or Off
- Language
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Voice Announcement
- Analog Mic AGC (Mic AGC-A)
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Accessing General Radio Information
- Keypad Microphone Features
- Using the Keypad
- Additional Advanced Features
- Selecting a Zone by Alias Search
- Initiating a Radio Check by Manual Dial
- Initiating Remote Monitor by Manual Dial
- Making a Private Call by Manual Dial
- Making a Group, Private or All Call with the Programmable Number Key
- Making a Group, Private or All Call by Alias Search
- Viewing an Entry in the Scan List by Alias Search
- Editing the Scan List by Alias Search
- Storing an Alias or ID from a Call List
- Making a Call Alert by Manual Dial
- RSSI Values
- Dual Tone Multi Frequency (DTMF)
- Security
- Password Lock Features
- Front Panel Configuration (FPC)
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Notes
- Français canadien
- Déclaration de conformité
- Consignes de sécurité importantes
- Version logicielle
- Droit d'auteur et copie du logiciel
- Pour commencer
- Identification des commandes de la radio
- Description des indicateurs d'état
- Réception et acheminement d'appels
- Fonctions avancées
- Vérification de la radio
- Écoute de bruits ambiants
- Listes de balayage
- Balayage
- Balayage par vote
- Réglages des contacts
- Réglages de l'indicateur d'appel
- Fonctions du Journal des appels
- Fonction Avertissement d'appel
- Fonction d'urgence
- Mettre à jour l'état analogique
- Cryptage
- Brouillage analogique
- Réglages multisite
- Sécurité
- Travailleur solitaire
- Liste de notification
- ARTS (Auto-Range Transponder System)
- Programmation par radiocommunication (OTAP)
- Utilitaires
- Activer ou désactiver les tonalités et les avertissements de la radio
- Régler l'écart de volume des tonalités d'avertissement
- Activer ou désactiver la tonalité d'autorisation
- Activer et désactiver la tonalité d'alerte de mise sous tension
- Régler le niveau de puissance
- Régler la luminosité de l'écran
- Activer ou désactiver Avert./phares
- Régler le niveau du silencieux
- Activer ou désactiver les voyants DEL
- Langue
- Activer ou désactiver la fonction de transmission vocale (VOX)
- Annonce vocale
- CGA Mic. analogique (Mic. CGA-A)
- Contrôle de gain automatique de microphone numérique (Mic. CGA-D)
- Audio intelligent
- Accéder aux renseignements généraux sur la radio
- Fonctions du microphone à clavier
- Utilisation du clavier
- Autres fonctions avancées
- Sélection d'une zone à l'aide de la recherche d'alias
- Exécution d'une vérification radio à l'aide de la numérotation manuelle
- Exécution de la fonction Écoute ambiance à l'aide de la numérotation manuelle
- Pour faire un appel privé à l'aide de la numérotation manuelle
- Faire un appel de groupe, privé ou général à l'aide de la touche numérique programmable
- Pour faire un appel de groupe, privé ou général à l'aide de la recherche d'alias
- Consulter une entrée de la liste de balayage à l'aide de la recherche d'alias
- Modification de la liste de balayage à l'aide de la recherche d'alias
- Enregistrer un alias ou un ID de la liste d'appel
- Envoi d'un avertissement d'appel à l'aide de la numérotation manuelle
- Valeurs RSSI
- Multifréquence à deux tonalités (DTMF)
- Sécurité
- Fonctions de verrouillage par mot de passe
- Configuration du panneau avant (FPC)
- Accessoires
- Annexe : Utilisation de la radio maritime dans la gamme de fréquence VHF
- Garantie limitée
- PRODUITS DE TÉLÉCOMMUNICATIONS MOTOROLA
- I. PROTECTION ASSURÉE PAR LA PRÉSENTE GARANTIE ET DURÉE DE CELLE-CI :
- II. CONDITIONS GÉNÉRALES :
- III. DROITS PRÉVUS PAR LES LOIS PROVINCIALES :
- IV. ENTRETIEN COUVERT PAR LA GARANTIE :
- V. CE QUI N'EST PAS COUVERT PAR LA PRÉSENTE GARANTIE :
- VI. DISPOSITIONS RELATIVES AUX BREVETS ET AUX LOGICIELS :
- VII. LOI APPLICABLE :
Receiving and Making Calls
English
18
5 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
6 Release the PTT button to listen.
7 If there is no voice activity for a predetermined period of
time, the call ends.
See Making a Group Call on page 20 for details on making a
Group Call.
Receiving and Responding to a Private Call
A Private Call is a call from an individual radio to another
individual radio.
Procedure:
When you receive a Private Call:
1 The green LED blinks.
2 The first text line shows the Private Call icon and the caller
alias. Your radio unmutes and the incoming call sounds
through the radio's speaker.
3 If the Channel Free Indication feature is enabled, you
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
OR
If the Voice Interrupt feature is enabled, press the PTT
button to stop the current call from the transmitting radio and
free the channel for you to talk/respond.
4 The green LED lights up.
5 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
6 Release the PTT button to listen.
7 If there is no voice activity for a predetermined period of
time, the call ends.
8 The display shows Call Ended.
See Making a Private Call on page 21 for details on making a
Private Call.
NAG.book Page 18 Monday, March 25, 2013 3:20 PM