User's Guide Part 2

Advanced Features
English
85
Changing the Display Mode
You can change radio’s display mode between Day or Night, as
needed. This affects the color palette of the display.
Procedure:
Press the programmed Display Mode button to toggle the
display mode settings.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Display and press c to select.
5 The display shows Day Mode and Night Mode. ^ or v to
the required setting and press
c to enable. 9 appears
beside selected setting.
NOTE: At Step 4, you can also use
< or > to change the
selected option.
Adjusting the Display Brightness
You can adjust radio’s display brightness as needed.
NOTE: Display brightness cannot be adjusted when “Auto
Brightness” is enabled.
Procedure:
Press the programmed Brightness button and proceed to
Step 5.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Brightness and press c to select.
5 The display shows a progress bar. Decrease display
brightness by pressing
< or increase the display brightness
by pressing
>. Select from setting of 1 to 8. Press c to
confirm your entry.

NAG-LACR.book Page 85 Tuesday, January 10, 2012 10:33 AM