User's Guide Part 2

Advanced Features

English

7 Press c to select.

8 ^ or v to Edit Priority and press c to select.

9 ^ or v to the required priority level and press c to select.

10 The display shows mini notice before returning to the

previous screen.

11 The priority icon appears left of the member’s name.

There is no priority icon if priority is set to None.

Scan

When you start a scan, your radio cycles through the

programmed scan list for the current channel looking for voice

activity.

The LED blinks yellow and the scan icon appears on the bar.

There are two ways of initiating scan:

• Scan Button (Manual): For channels that have Auto Scan

disabled, scan can be turned on and off using programmed

Scan button.

• Auto Scan (Automatic): Your radio automatically starts

scanning when you select a channel that has Auto Scan

enabled.

NOTE: This feature is not applicable in Capacity Plus

Setting an Active Scan List

Procedure:

1 c to access the menu.

2 ^ or v to select Scan and press c to select.

3 ^ or v to select Set Active List and press c to

select.

4 ^ or v to required list and press c to select.

NOTE: The list selected will be your active scan list.



NAG-LACR.book Page 39 Tuesday, January 10, 2012 10:33 AM