User's Guide Part 2

Making and Receiving Calls

English

Procedure:

When you receive an All Call:

1 A tone sounds and the LED blinks green.

2 The Group Call icon appears in the top right corner. The first

text line shows the caller alias. The second text line displays

All Call. Your radio unmutes and the incoming call

sounds through the radio’s speaker.

3 Once the All Call ends, the radio returns to the previous

screen it was on before receiving the call. An All Call does

not wait for a predetermined period of time before ending.

If the Channel Free Indication feature is enabled, you will

hear a short alert tone the moment the transmitting radio

releases the PTT button, indicating the channel is now

available for use.

You cannot respond to an All Call.

See Making an All Call on page 27 for details on making an All

Call.

NOTE: The radio stops receiving the All Call if you switch to a

different channel while receiving the call.

During an All Call, you will not be able to use any

programmed button functions until the call ends.

Making a Radio Call

After selecting your channel, you can select a subscriber ID, or

group by using:

• The PTT Button

• A programmed One Touch Access button (see Making a

Group or Private Call with the One Touch Access Button

on page 28)

• The programmed number keys (see Making a Group,

Private or All Call with the Programmable Number Key on

page 28).

• The Contacts list (see Contacts Settings on page 41)

• Manual Dial (via Contacts) – This method is for Private Calls

only and is dialed using the keypad (see Making a Private

Call from Contacts on page 42).

NOTE: Your radio must have the Privacy feature enabled on

the channel to send a privacy-enabled transmission.

Only target radios with the same Privacy Key OR the

same Key Value and Key ID as your radio will be able

to unscramble the transmission.

See Privacy on page 70 for more information.

NAG-LACR.book Page 25 Tuesday, January 10, 2012 10:33 AM