User's Guide

English
56
Radio Enable
Procedure:
Use the programmed Radio Enable button.
1 Press the programmed Radio Enable button.
2 < or > to the required alias or ID and press e to
select.
3 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
4 Wait for acknowledgment.
5 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
OR
Procedure:
Use the menu.
1 c to access the menu.
2 < or > to Contacts and press e to select. The
entries are alphabetically sorted.
3 < or > to the required alias or ID and press e to
select.
4 < or > to Radio Enable and press e to select. The
LED blinks green.
5 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
6 Wait for acknowledgment.
7 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
Do not press
d during the Radio Enable operation as you
will not get an acknowledgement message.

NAG-LACR.book Page 56 Thursday, April 12, 2012 5:58 PM