User's Guide

English
55
Security
You can enable or disable any radio in the system. For example,
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled. Check with your
dealer or system administrator for more information.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.
2 < or >to the required alias or ID and press e to
select.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
4 Wait for acknowledgment.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
OR
Procedure:
Use the menu.
1 c to access the menu.
2 < or > to Contacts and press e to select. The
entries are alphabetically sorted.
3 < or > to the required alias or ID and press e to
select.
< or > to Radio Disable and press e to select.
4 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
5 Wait for acknowledgment.
6 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
Do not press
d during the Radio Disable operation as you
will not get an acknowledgement message.

NAG-LACR.book Page 55 Thursday, April 12, 2012 5:58 PM