User's Guide

English
54
NOTE: At Step 5, you can also use < or > to change
the selected option.
Starting a Manual Site Search
Procedure:
Press the programmed Manual Site Roam button and proceed
to Step 6.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press c to select.
3 < or > to Radio Settings and press c to select.
4 < or > to Site Roaming and press c to select.
5 < or > to Active Search and press c to select.
6 A tone sounds and the display shows Finding Site.
The LED blinks green.
7 If a new site is found, a tone sounds and the LED turns off.
The display shows Site <Alias> Found.
OR
If there is no available site within range, a tone sounds and
the LED turns off. The display shows Out of Range.
OR
If a new site is within range, but the radio is unable to
connect to it, a tone sounds and the LED turns off. The
display shows Channel Busy.
8 The radio returns to the Home screen.

NAG-LACR.book Page 54 Thursday, April 12, 2012 5:58 PM