User's Guide

English
49
Analog Message Encode
Your radio is able to send preprogrammed messages from the
Message list to a radio alias or to the dispatcher.
Sending MDC Message Encode to Dispatcher
Procedure:
1 < or > to Message and press e to select.
2 < or > to Quick Text and press e to select.
3 < or > to the required message. Press e to send.
4 The display shows transitional mini notice, confirming your
message is being sent.
5 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Sending 5-Tone Message Encode to Contact
Procedure:
1 < or > to Message and press e to select.
2 < or > to Quick Text and press e to select.
3 < or > to the required message. Press e to select.
4 < or > to the required contact. Press e to select.
5 The display shows transitional mini notice, confirming your
message is being sent.
6 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.


NAG-LACR.book Page 49 Thursday, April 12, 2012 5:58 PM