User's Guide

English
39
Assigning Ring Styles
You can program your radio to sound one of ten predefined
ringing tones when receiving a Call Alert from a particular
contact.
Procedure:
1 c to access the menu.
2 < or > to Contacts and press e to select.The
entries are alphabetically sorted.
3 < or > to the required alias or ID and press e to
select.
4 < or > to Edit and press e to select.
5 Press c until display shows Edit Ringtone menu.
6 A 9 indicates the current selected tone.
7 < or > to the required tone and press e to select. 9
appears beside selected tone.
8 The display shows a positive mini notice.
The radio sounds out each ring style as you navigate through
the list.
Escalating Alarm Tone Volume
You can program your radio to continually alert you when a
radio call remains unanswered. This is done by automatically
increasing the alarm tone volume over time. This feature is
known as Escalert.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
5 < or > to Escalert.
6 Press e to enable Escalert. The display shows 9 beside
Enabled.
OR
Press
e to disable Escalert. The 9 disappears from beside
Enabled.
NOTE: At Step 5, you can also use < or > to change the
selected option.


NAG-LACR.book Page 39 Thursday, April 12, 2012 5:58 PM