User's Guide

English
30
Scan Lists
Scan lists are created and assigned to individual channels/
groups. Your radio scans for voice activity by cycling through
the channel/group sequence specified in the scan list for the
current channel/group.
Your radio can support up to 250 scan lists, with a maximum of
16 members in a list. Each scan list supports a mixture of both
analog and digital entries.
You can add, delete, or prioritize channels by editing a scan list.
You can attach a new scan list to your radio via Front Panel
Programming.
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
Viewing an Entry in the Scan List
Procedure:
1 c to access the menu.
2 < or > to Scan and press e to select.
3 < or > to Scan List and press e to select.
4 Use < or > to view each member on the list.
The priority icon appears left of the member’s alias, if set, to
indicate whether the member is on a Priority 1 or Priority 2
channel list. You cannot have multiple Priority 1 or Priority 2
channels in a scan list.
There is no priority icon if priority is set to None.
Editing the Scan List
Adding a New Entry to the Scan List
Procedure:
1 c to access the menu.
2 < or > to Scan and press e to select.
3 < or > to Scan List and press e to select.
4 < or > to Add Member and press e to select.
5 < or > to the required alias or ID.
6 < or > to the required priority level and press e to
select.
7 The display shows positive mini notice, followed
immediately by Add Another?.
8 < or > to Yes and press e to select, to add another
entry, and repeat Steps 5 to 8.
OR



NAG-LACR.book Page 30 Thursday, April 12, 2012 5:58 PM