User's Guide

English

Making a Call with the Channel Selector Knob

Making a Group Call

To make a call to a group of users, your radio must be

configured as part of that group.

Procedure:

1 Select the channel with the active subscriber alias or ID.

See Selecting a Channel on page 19.

Press the programmed One Touch Access button.

2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from

your mouth.

3 Press the PTT button to make the call. The LED lights up

solid green. The first text line shows the group call icon. The

second text line shows the group call alias,

4 Wait for the Talk Permit Tone to finish (if enabled) and

speak clearly into the microphone.

Wait for the PTT Sidetone to finish (if enabled) and

speak clearly into the microphone.

5 Release the PTT button to listen.When the target radio

responds, the LED blinks green. You see the Group Call

icon, the group alias or ID, and transmitting radio alias or ID

on your display.

6 If the Channel Free Indication feature is enabled, you

will hear a short alert tone the moment the target radio

releases the PTT button, indicating the channel is free for

you to respond. Press the PTT button to respond.

If there is no voice activity for a predetermined period of

time, the call ends.

7 Radio returns to the screen you were on prior to initiating the

call.

You can also make a Group Call via Contacts (see Making a

Group Call from Contacts on page 35).

Making a Private Call

While you can receive and/or respond to a Private Call

initiated by an authorized individual radio, your radio

must be programmed for you to initiate a Private Call.

There are two types of Private Calls. The first type, where a

radio presence check is performed prior to setting up the call,

while the other sets up the call immediately.

Only one of these call types can be programmed to your

radio by your dealer.

You hear a negative indicator tone, when you make a Private

Call via the Contacts list, Call Log, One Touch Access button,

the programmed number keys, or the Channel Selector Knob,

if this feature is not enabled.



NAG-LACR.book Page 24 Thursday, April 12, 2012 5:58 PM