User's Guide

English

Selecting a Channel

Transmissions are sent and received on a channel. Depending

on your radio’s configuration, each channel may have been

programmed differently to support different groups of users or

supplied with different features. After selecting the relevant

Zone, select the relevant channel you require to transmit or

receive on.

Procedure:

Once the required zone is displayed (if you have multiple

zones in your radio), turn the programmed Channel Selector

Knob to select the channel.

Receiving and Responding to a Radio Call

Once the channel, subscriber

ID or group ID is displayed,

you can proceed to receive

and respond to calls.

The LED lights up solid green

while the radio is transmitting

and blinks green when the

radio is receiving.

NOTE: The LED lights up solid green while the radio is

transmitting and double blinks green when the radio is

receiving a privacy-enabled call.

To unscramble a privacy-enabled call, your radio must

have the same Privacy Key, OR the same Key Value

and Key ID (programmed by your dealer), as the

transmitting radio (the radio you are receiving the call

from).

See Privacy on page 51 for more information.

LED

Indicator

NAG-LACR.book Page 19 Thursday, April 12, 2012 5:58 PM