User's Guide
Table Of Contents
- Product Safety and RF Energy Exposure Booklet for Mobile Two-Way Radios Installed in Vehicles or as Fixed Site Control Stations
- Folleto de normas de seguridad y de exposición a la energía de RF al usar radios bidireccionales móviles instalados en vehículos o estaciones de control en emplazamientos fijos
- Información sobre exposición a la energía de RF y su control, e instrucciones operacionales para satisfacer los requisitos de la FCC sobre el uso como herramienta ocupacional
- Pautas para la instalación de antenas de radios móviles
- Interferencia y compatibilidad electromagnética
- Seguridad al conducir
- Advertencias operacionales
- Folheto de normas de segurança e de exposição à energia de RF quando da utilização de rádios bidirecionais móveis instalados em veículos ou estações de controle em instalações fixas
- Informações sobre a exposição à energia de RF e seu controle, e instruções operacionais para satisfazer os requisitos da ANATEL sobre o uso como ferramenta ocupacional
- Orientações gerais para a instalação das antenas de rádios móveis
- Interferência e compatibilidade eletromagnética
- Segurança ao dirigir
- Advertências operacionais
- Brochure de normes de sécurité et d’exposition à l’énergie de RF pour radios bidirectionnelles mobiles installées dans des véhicules ou comme stations de contrôle à emplacements fixes
- Sensibilisation à l’exposition à l’énergie de RF, moyens de contrôle et consignes d’utilisation pour conformité aux normes du FCC en matière d’usage professionnel de cette radio
- Consignes d’installation pour les antennes de radios mobiles
- Interférence et compatibilité électromagnétique
- Sécurité lors de la conduite
- Avertissements de fonctionnement
8
English
Electromagnetic Interference/Compatibility
NOTE: Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility. It may be necessary to
conduct compatibility testing to determine if any electronic equipment used
in or around vehicles or near fixed site antenna is sensitive to external RF
energy or if any procedures need to be followed to eliminate or mitigate the
potential for interaction between the radio transmitter and the equipment
or device.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your
radio in any facility where posted notices instruct you to do so. Hospitals or
health care facilities may be using equipment that is sensitive to external RF energy.
Vehicles
To avoid possible interaction between the radio transmitter and any vehicle
electronic control modules, such as ABS, engine, or transmission controls, the
radio should be installed only by an experienced installer and the following
precautions should be used when installing the radio:
1. Refer to the manufacturer’s instructions or other technical bulletins for
recommendations on radio installation.
2. Before installing the radio, determine the location of the electronic control
modules and their harnesses in the vehicle.
3. Route all radio wiring, including the antenna transmission line, as far away as
possible from the electronic control units and associated wiring.
6881095C99-G.book Page 8 Monday, December 21, 2009 3:33 PM