User's Manual

Keypad Microphone Features
English
81
8 The display shows <Zone> Selected momentarily and
returns to the selected zone screen.
Initiating a Radio Check by Manual Dial
Procedure:
1 Sg to access the menu.
2 PorQf or h to Contacts and press Ng to
select.
3 PorQf or h to Manual Dial and press Ng to
select.
4 If there is a previously dialed subscriber ID, the ID appears
along with a blinking cursor.
Use the keypad to edit the ID. Press
Ng to select.
OR
Use the keypad to enter a new subscriber ID. Press
Ng
to select.
5 PorQf or h to Radio Check and press Ng to
select.
6 The display shows Radio Check: <Subscriber ID>,
indicating that Radio Check is in progress. The green LED
lights up.
7 Wait for acknowledgement.
8 If the target radio is active in the system, a tone sounds and
the display briefly shows Target Radio Available.
OR
If the target radio is not active in the system, a tone sounds
and the display briefly shows Target Radio Not
Available.
9 Radio returns to the subscriber ID screen.
If the Re button is pressed when the radio is waiting for
acknowledgement, a tone sounds, and the radio terminates all
retries and exits Radio Check mode.
Initiating Remote Monitor by Manual Dial
Procedure:
1 Sg to access the menu.
2 PorQf or h to Contacts and press Ng to
select.
3 PorQf or h to Manual Dial and press Ng to
select.

