User's Manual

Advanced Features
English
30
Remote Monitor
Use the Remote Monitor feature to turn on the microphone of a
target radio (subscriber IDs only). No audible or visual indication
is given to the target radio. You can use this feature to monitor,
remotely, any audible activity surrounding the target radio.
Your radio must be programmed to allow you to use this
feature.
Initiating Remote Monitor
Procedure:
Use the programmed Remote Monitor button.
1 Press the programmed Remote Monitor button.
2 PorQf or h to the required subscriber alias or ID
and press Ng to select.
3 Radio sounds an alert tone and the green LED blinks.
4 Wait for acknowledgment.
5 The display shows Remote Monitor Successful.
OR
The display shows Remote Monitor Failed.
6 If successful:
The radio starts receiving audio from the monitored radio for
a programmed duration.
Once the timer expires, the radio sounds an alert tone and
the green LED turns off. The display shows Remote
Monitor Ended.
OR
If unsuccessful:
The radio repeats the attempt until the programmed number
of tries expires.
OR
Procedure:
Use the menu.
1 Sg to access the menu.
2 PorQf or h to Contacts and press Ng to
select.
3 PorQf or h to the required subscriber alias or ID
and press Ng to select.
4 PorQf or h to Remote Mon. and press Ng to
select.
5 Radio sounds an alert tone and the green LED blinks.
6 Wait for acknowledgment.
