User's Manual

Keypad Microphone Features
English
89
Text Messaging
The maximum length of characters for a text message,
including the subject line (seen when receiving message from
an e-mail application), is 138.
The radio exits the current screen once the inactivity timer
expires. Any text message in the writing/editing screen will
automatically be saved to the Drafts folder.
NOTE: Long press
Re at any time to return to the Home
screen.
Writing and Sending a Text Message
Procedure:
Press the programmed Text Messaging button and proceed to
Step 3.
OR
Follow the procedure below.
1 Sg to access the menu.
2 PorQf or h to Messages and press Ng to
select.
3 PorQf or h to Write and press Ng to select.
4 Use the keypad to type your message.
Press
Pf to move one space to the left.
Press
Qh or the # key to move one space to the right.
Press the * key to delete any unwanted characters.
5 Press Ng once message is composed.
6 PorQf or h to Send and press Ng to send
the message.
OR
PorQf or h to Save and press Ng to save
the message to the Drafts folder.
OR
Re to edit the message.
Re again to delete the message or save it to the
Drafts folder.
7 PorQf or h to the required subscriber alias or ID
and press
Ng to select.
OR
PorQf or h to Manual Dial and press Ng to
select.
Key in the subscriber ID and press Ng.
8 The display shows Text Message: <Subscriber Alias
or ID>, confirming your message is being sent.
9 If the message is sent, a tone sounds and the display shows
Message Sent.
OR
If the message is not sent, the display shows Message Send
Failed.
