User's Manual
Table Of Contents
- Declaration of Conformity
- Notes
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contacts Settings
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Selective Call
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Analog Message Encode
- Analog Status Update
- Privacy
- Dual Tone Multi Frequency (DTMF)
- IP Site Connect
- Security
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Turning Keypad Tones On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Setting the Power Level
- Changing the Display Mode
- Adjusting the Display Brightness
- Controlling the Display Backlight
- Setting the Squelch Level
- Turning the Introduction Screen On or Off
- Locking and Unlocking the Keypad
- Language
- Turning the LED Indicator On or Off
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Voice Announcement
- Call Forwarding
- Menu Timer
- Analog Mic AGC
- Digital Mic AGC
- Intelligent Audio
- GPS
- Accessing General Radio Information
- Front Panel Programming (FPP)
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
- Notes
English
6 The display shows Text Message:
<Subscriber/Group Alias or ID>.
7 If the message is sent successfully, a tone
sounds. Display shows Message Sent.
OR
If the message cannot be sent, the display
shows Message Send Failed.
If the message fails to send, the radio returns you
to the
Resend
option screen.
• Press
N to resend the message to the same
subscriber/group alias or ID.
• Select
Forward
to send the message to
another subscriber/group alias or ID.
• Select
Edit
to edit the message before
sending it.
NOTE: Once a message is sent to another
radio, it is saved in Sent Items. The most
recent sent text message is always
added to the top of the Sent Items list.
The Sent Items folder stores a maximum
of thirty (30) last sent messages. When
the folder is full, the next sent text
message automatically replaces the
oldest text message in the folder.
The icon at the top right corner of the
screen indicates the status of the
message.
Replying to a Text Message with
Quick Text from the Inbox
Press the programmed Text Message button
and proceed to Step 3.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Messages. Press N to select.
3 Por Q to Inbox. Press N to select.
4 Por Q to the required message and
press
N to select.
A subject line may be shown if the message
is from an e-mail application.
5 Press N once more to access the sub-
menu.
6 Por Q to Reply and press N to select.
7 Por Q to Quick Text and press N to
select.
8 Press N once more to send the reply.
9 The display shows Text Message:
<Subscriber/Group Alias or ID>.
10 If the message is sent successfully, a tone
sounds. Display shows Message Sent.
OR
If the message cannot be sent, the display
shows Message Send Failed.
If the message fails to send, the radio returns you
to the
Resend
option screen.
• Press
N to resend the message to the same
subscriber/group alias or ID.
• Select
Forward
to send the message to
another subscriber/group alias or ID.
• Select
Edit
to edit the message before
sending it.
Sending an Emergency Alarm
1 Press the programmed Emergency On
button.
2 The display shows Sending Alarm, which
alternates with your radio ID. The LED lights
up solid green and the Emergency icon
appears on the Home screen display.
3 When an Emergency Alarm acknowledgment
is received, the Emergency tone sounds and
the LED blinks green. The display shows
Emergency Alarm Successful.
OR
If your radio does not receive an Emergency
Alarm acknowledgement, and after all retries
have been exhausted, a tone sounds and the
display shows Emergency Alarm Failed.
4 Radio exits the Emergency Alarm mode and
returns to the Home screen.
If your radio is set to Silent, it will not display any
audio or visual indicators during Emergency
mode.