User's Manual
Table Of Contents
- Declaration of Conformity
- Notes
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contacts Settings
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Selective Call
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Analog Message Encode
- Analog Status Update
- Privacy
- Dual Tone Multi Frequency (DTMF)
- IP Site Connect
- Security
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Turning Keypad Tones On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Setting the Power Level
- Changing the Display Mode
- Adjusting the Display Brightness
- Controlling the Display Backlight
- Setting the Squelch Level
- Turning the Introduction Screen On or Off
- Locking and Unlocking the Keypad
- Language
- Turning the LED Indicator On or Off
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Voice Announcement
- Call Forwarding
- Menu Timer
- Analog Mic AGC
- Digital Mic AGC
- Intelligent Audio
- GPS
- Accessing General Radio Information
- Front Panel Programming (FPP)
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
- Notes
English
Follow the procedure below.
1 Turn the Channel Selector Knob to select the
channel with the active group alias or ID.
OR
S to access the menu.
Por Q to Contacts. Press N to select.
Por Q to the alias or ID you want to call
and press N to select.
2 Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call. The
LED lights up solid green. The display shows
the group alias or ID, and the Group Call icon.
4 Wait for the Talk Permit Tone to finish (if
enabled).
OR
Wait for the PTT Sidetone to finish (if
enabled).
5 Speak clearly into the microphone.
6 Release the PTT button to listen. When the
target radio responds, the LED blinks green.
Display shows the Group Call icon, the group
ID, and target radio ID.
7 If the Channel Free Indication feature is
enabled, you will hear a short alert tone
the moment the target radio releases the
PTT button, indicating the channel is free
for you to respond. Press the PTT button
to respond.
OR
If the Voice Interrupt feature is enabled,
press the PTT button to stop the current
call from the transmitting radio and free the
channel for you to talk/respond.
OR
If there is no voice activity for a
programmed period of time, the call ends.
To make a call to a group of users, your radio
must be configured as part of that group.
Your radio must have the Privacy feature
enabled on the channel to send a privacy-
enabled transmission. Only target radios with
the same Privacy Key OR the same Key
Value and Key ID as your radio will be able to
unscramble the transmission.
Making a Private Call
NOTE: Your radio must be programmed for you
to initiate a Private Call.
Press the programmed One Touch Access
button and proceed to Step 2.
OR
Long press the programmed number key and
proceed to Step 2.
OR
Follow the procedure below.
1 Turn the Channel Selector Knob to select the
channel with the active subscriber alias or ID.
OR
S to access the menu.
Por Q to Contacts. Press N to select.
Por Q to the ID you want to call and
press
N to select.
OR
Use the keypad to type the required alias.
The first line of the display shows the
characters you keyed in. The second line of
the display shows the required alias.
2 Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call. The
LED lights up solid green. The first line
displays the subscriber alias or ID. The
second line displays Private Call and the
Private Call icon.
4 Wait for the Talk Permit Tone to finish (if
enabled). Speak clearly into the microphone.
5 Release the PTT button to listen. When the
target radio responds, the LED blinks green.
6 If the Channel Free Indication feature is
enabled, you will hear a short alert tone the
moment the target radio releases the PTT
button, indicating the channel is free for you
to respond. Press the PTT button to respond.
OR
If the Voice Interrupt feature is enabled, press
the PTT button to stop the current call from
the transmitting radio and free the channel for
you to talk/respond.
OR
If there is no voice activity for a programmed
period of time, the call ends.
7 You hear a short tone. The display shows
Call Ended.