User's Manual

30
English
PHONE
PHONE
Your radio allows you to place and receive
telephone calls through a repeater (depending
on phone line availability). You can edit the
phone list through your radio’s menu (see
page 33).
• D appears on the display when you are in
Phone mode.
Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access/de access code to the repeater.-
Immediate Auto – your radio will transmit the
access/deaccess code automatically upon
entering phone mode or disconnecting a
phone call. You will hear a series of tones, and
see your access/deaccess code on the
display, indicating that an access/deaccess
code is being sent automatically.
Delayed Auto – your radio will transmit the
access code upon a PTT button press. The
de access code is sent automatically when -
you exit phone mode.
Manual Enter your access/deaccess code -
using the DTMF microphone keypad and press
the PTT button.
RECEIVE A PHONE CALL D
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button (see
page 12), and skip to step 6.
– or –
Press the PTT button, and if the Hot Keypad
feature has been preprogrammed by your
dealer/programmer, do the following:
1 G or H to select a channel that has been
programmed for telephone.
2
D to enter menu mode.
3 G or H until
4 D to select
Note: The D appears on the display.
PHONE
PHONE
English.book Page 30 Friday, November 7, 2003 12:41 PM