User's Manual

25
English
SCAN
STOP SYSTEM SCAN
Press the preprogrammed Scan button to stop
System Scan (see page 12).
– or –
Note: Your dealer/programmer can
preprogram your radio when exiting
System Scan to automatically revert to
the last scan channel that had activity on
it or to automatically revert to the
channel where scan was initiated.
START AUTO SCAN G
Auto Scan automatically starts scanning once
a channel with Auto Scan enabled is selected.
G or H to select a channel that has been
preprogrammed for Auto Scan by your dealer/
programmer.
1 G or H to select a channel that contains a
Scan list.
2
D to enter menu mode.
3 G or H until
4 D to select
The display shows the current scan status.
5 G or H until
6 D to select the current setting.
1 D to enter menu mode.
2
G or H until
3 D to select
SYS SCAN
SYS SCAN
SCAN ON
SYS SCAN
SYS SCAN
The display shows the current scan status.
4
G or H until
5 D to select the current setting.
•The Gsymbol disappears from the
display.
SCAN OFF
English.book Page 25 Friday, November 7, 2003 12:41 PM