User's Manual

15
English
GETTING STARTED
GETTING STARTED
TURN THE RADIO ON OR OFF
ADJUST THE VOLUME
Turn the On/Off/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
– or –
Note: Your dealer/programmer can
preprogram one of the programmable
buttons to Volume Set.
SELECT A RADIO CHANNEL
Up to a total of 64 channels can be
programmed into your radio.
Select a Channel
G or H to select the desired channel.
ON OFF
Rotate the On/Off/
Volume Control knob
clockwise. If power up is -
successful, you will hear
the Self Test Pass Tone -
( ) and see the
green LED indicator and
display icons light
momentarily.
If the radio fails to power
up, you will hear the Self
Test Fail Tone
( ). The radio
will need to be returned
for re programming.-
Rotate the On/Off/
Volume Control knob
counterclockwise until
you hear a click and
both the display and
LED indicators turn off.
PERS
4
On/Off/Volume
Control Knob
1 Hold down the Volume Set button (see
page 11).
• You will hear a continuous tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set button.
English.book Page 15 Friday, November 7, 2003 12:41 PM