Installation Manual

Table Of Contents
Figure 36: Band Clamps and Pole Mount Bracket
b Attach the wall mount bracket to the pole mount bracket, with the receiving slots facing
upwards, using two ½ in. bolts and two ½ in. nuts. Torque to 300 in.-lb. See Figure 37: Wall
Mount Bracket Attached to Pole Mount Bracket on page 105
Figure 37: Wall Mount Bracket Attached to Pole Mount Bracket
3 If using a power supply, mount using the four M4 T20 bit screws. Torque to 20 in.-lbs.
MN003557A01-AF
Chapter 10: SLR 1000 Installation
105