User Manual
Table Of Contents
- Declaration of Conformity
- Important Safety Information
- Firmware Version
- Computer Software Copyrights
- Handling Precautions
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Receiving and Making Calls
- Advanced Features
- Accessories
- Batteries Warranty
- Limited Warranty
- Notes
Preparing Your Radio for Use
English
3
Attaching the Antenna
With the radio turned off, set the
antenna in its receptacle and turn
clockwise.
To remove the antenna, turn the
antenna counterclockwise.
Attaching the Belt Clip
Align the grooves on the clip
with those on the battery and
press downwards until you
hear a click.
To remove the clip, press the
belt clip tab away from the
battery using a key. Then
slide the clip upwards and
away from the radio.
If the antenna needs to be replaced, ensure that only
CP200d antennas are used. Neglecting this will
damage your radio. See Antennas on page 33 for a
list of available antennas.
NAG-LACR.book Page 3 Thursday, March 28, 2013 10:32 AM