Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- CP200d Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Belt Clip
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Call Alert with the One Touch Access Button
- Sending an Emergency Alarm
28
English
Sending an Emergency Alarm
This feature allows you to send an Emergency Alarm,
a non-voice signal, which triggers an alert indication
on a group of radios.
1. Press the programmed Emergency On button.
2. The LED lights up solid green
3. When an Emergency Alarm acknowledgment is
received, the Emergency tone sounds and the
LED blinks green.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a low-pitch tone sound.
4. Radio exits the Emergency Alarm mode.
NOTE: Indicates a conventional Analog
mode-only feature.
MainContent_EN.fm Page 28 Monday, March 25, 2013 12:16 PM