Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- CP200d Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Belt Clip
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Call Alert with the One Touch Access Button
- Sending an Emergency Alarm
25
English
Making a Group Call
1. Turn the Channel Selector Knob to select the
channel with the active group alias or ID.
OR
Press the programmed One Touch Access
button.
2. Hold the radio vertically 1 to 2 inches (2.5 to
5.0cm) from your mouth.
3. Press the PTT button to make the call. The LED
lights up solid green.
4. Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled)
and speak clearly into the microphone.
5. Release the PTT button to listen.When the target
radio responds, the LED blinks green.
6. If the Channel Free Indication feature is
enabled, you will hear a short alert tone the
moment the target radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a predetermined
period of time, the call ends.
MainContent_EN.fm Page 25 Monday, March 25, 2013 12:16 PM