Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- CP200d Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Belt Clip
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Call Alert with the One Touch Access Button
- Sending an Emergency Alarm
24
English
Accessing the Radio from Password
1. Power up the radio.
2. You hear a continuous tone.
3. Use the Channel Selector Knob to enter the first
digit of the password.
4. Press Side Button 1 or 2 to enter each digit of the
remaining three digits of the password. You hear a
positive indicator tone for each Side Button press.
When the second digit of the password is entered,
your radio ignores any Channel Selector Knob
position change.
5. When the last digit of the four-digit password is
entered, your radio automatically checks the
validity of the password.
If the password is correct:
Your radio proceeds to power up. See Powering
Up the Radio on page 23.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3.
OR
After the third incorrect password, your radio
enters into locked state. A tone sounds and the
LED double blinks yellow.
Selecting a Channel
Turn the programmed Channel Selector Knob to
select the channel.
MainContent_EN.fm Page 24 Monday, March 25, 2013 12:16 PM