Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- CP200d Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Belt Clip
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Call Alert with the One Touch Access Button
- Sending an Emergency Alarm
23
English
Powering Up the Radio
Rotate the On/Off/Volume Control Knob clockwise
until you hear a click. The LED lights up solid green.
If enabled, a brief tone sounds indication that the
power up test is successful.There is no power up tone
if the radio tones/alerts function is disabled.
If your radio does not power up, check your battery.
Make sure that it is charged and properly attached. If
your radio still does not power up, contact your dealer.
To turn off the radio, rotate the knob counterclockwise
until you hear a click.
Adjusting the Volume
To increase the volume, turn the On/Off Volume
Control Knob clockwise.
To decrease the volume, turn this knob
counterclockwise.
NOTE: Your radio can be programmed to have a
minimum volume offset where the volume
level cannot be turned down fully. Check with
your dealer or system administrator for more
information.
MainContent_EN.fm Page 23 Monday, March 25, 2013 12:16 PM