Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- CP200d Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Belt Clip
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Call Alert with the One Touch Access Button
- Sending an Emergency Alarm
13
English
A modification changes the unit’s hardware from its
original design configuration. Modifications can only
be made by the original product manufacturer.
• DO NOT replace or change
accessories in a hazardous
atmosphere. Contact sparking may
occur while installing or removing
accessories and cause an explosion
or fire.
• Turn the radio off before removing or
installing a battery or accessory.
• DO NOT disassemble an intrinsically
safe product in any way that
exposes the internal circuits of the
unit.
• Failure to use an intrinsically safe
approved battery or Approved
accessories specifically approved
for the radio unit may result in the
dangerously unsafe condition of an
unapproved radio combination
being used in a hazardous location
• Unauthorized or incorrect
modification of the intrinsically safe
approved Product will negate the
approval rating of the product.
W A R N I N G
MainContent_EN.fm Page 13 Monday, March 25, 2013 12:16 PM