User's Manual

Advanced Features
English
32
Radio Check
If enabled, this feature allows you to determine if another radio
is active in a system without disturbing the user of that radio. No
audible or visual notification is shown on the target radio.
This feature is only applicable for subscriber aliases or IDs.
Sending a Radio Check
Procedure:
Use the programmed Radio Check button.
1 Press the programmed Radio Check button.
2 f or h to the required subscriber alias or ID and press
g to select.
3 The display shows transitional mini notice, indicating the
request is in progress. The green LED lights up.
4 Wait for acknowledgement.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
6 Radio returns to the subscriber alias or ID screen.
OR
Procedure:
Use the menu.
1 g to access the menu.
2 f or h to Contacts and press g to select.
3 f or h to the required subscriber alias or ID and press
g to select.
4 f or h to Radio Check and press g to select.
5 The display shows transitional mini notice, indicating the
request is in progress. The green LED lights up.
6 Wait for acknowledgement.
7 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
8 Radio returns to the subscriber alias or ID screen.
If the
e button is pressed when the radio is waiting for
acknowledgement, a tone sounds, and the radio terminates all
retries and exits Radio Check mode.
You can also initiate Radio Check via manual dial (see
Initiating a Radio Check by Manual Dial on page 89).

NAG.book Page 32 Thursday, January 3, 2013 3:15 PM