User's Manual

Receiving and Making Calls
English
28
the radio returns to the screen you were on prior to initiating
the call.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6 Press the PTT button to talk and release it to listen.
To enter extra digits, if requested by the Phone Call:
Enter the extra digits using the keypad and press
g to
proceed. The DTMF tone sounds and the radio returns to
the previous screen.
7 Press e to end the call.
If de-access code was not preconfigured in the Contacts list,
the display shows De-Access Code:. Enter the de-access
code and press
g to proceed. The radio returns to the
previous screen.
OR
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
8 The DTMF tone sounds and the display shows Ending
Phone Call.
9 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Steps 6
and 7 or wait for the telephone user to end the call.
When the telephone user ends the call, a tone sounds and the
display shows Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
During channel access, press
e to dismiss the call attempt
and a tone sounds.
During the call, when you press One Touch Access button with
the deaccess code preconfigured or enter the deaccess code
as the input for extra digits, your radio attempts to end the call.
The access or deaccess code cannot be more than 10
characters.
NAG.book Page 28 Thursday, January 3, 2013 3:15 PM