User's Manual

Keypad Microphone Features
English
109
Radio Enable via Manual Dial
Procedure:
1 g to access the menu.
2 f or h to Contacts and press g to select. The entries
are alphabetically sorted.
3 f or h to Manual Dial and press g to select.
f or h to Private Call and press g to select.
The first line of the display shows Radio Number:.
Key in the subscriber ID and press g.
4 f or h to Radio Enable and press g to select.
5 The display shows Radio Enable and the subscriber alias
or ID. The green LED lights up.
6 Wait for acknowledgment.
7 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
Do not press
e during the Radio Enable operation as you will
not get an acknowledgement message.
Password Lock Features
If enabled, this feature allows you to access your radio via
password upon powering up. You can use a keypad microphone
or Scroll Up/Down buttons to enter password.
Accessing the Radio from Password
Procedure:
Power up the radio.
1 You hear a continuous tone.
2 Enter your current four-digit password via keypad
microphone.
The display shows
●●●●. Press g to proceed.
OR
Enter your current four-digit password. Press
f or h to
edit each digit’s numeric value and
g to enter the selected
digit and move to the next digit. Each digit changes to
●.
Press
g to confirm your selection.
You hear a positive indicator tone for every digit pressed.
Press < to remove the each ● on the display. You hear a
negative indicator tone, if you press
< when the line is
empty, or if you press more than four digits.


NAG.book Page 109 Thursday, January 3, 2013 3:15 PM