User's Manual

Keypad Microphone Features
English
104
Press > or the # key to move one space to the right.
Press the * key to delete any unwanted characters.
5 Press g once message is composed.
6 f or h to the required alias or ID and press g to
select.
OR
f or h to Manual Dial and press g to select.
Key in the subscriber ID and press
g.
OR
e to edit the message.
e again to discard the message or save it to the Drafts
folder.
7 The display shows transitional mini notice, confirming your
message is being sent.
8 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the text message fails to send, the radio returns you to the
Resend option screen (see Managing Fail-to-Send Text
Messages on page 57 and page 106).
Replying to Text Messages from the Inbox
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 g to access the menu.
2 f or h to Messages and press g to select.
3 f or h to Inbox and press g to select.
4 f or h to the required message and press g to select.
A subject line may be shown if the message is from an
e-mail application.
5 Press g once more to access additional options.
6 f or h to Reply and press g to select.
A blinking cursor appears. Use the keypad to type your
message.
Press < to move one space to the left.
Press
> to move one space to the right.
Press
* to delete any unwanted characters.
Long press # to change text entry method.
7 Press g once message is composed.

NAG.book Page 104 Thursday, January 3, 2013 3:15 PM