User's Manual

Keypad Microphone Features
English
93
4 Press the PTT button to talk and release it to listen. The
To enter extra digits, if requested by the Phone Call:
Enter the extra digits using the keypad and press
g to
proceed. The DTMF tone sounds and the radio returns to
the previous screen.
5 Press e to end the call.
If deaccess code was not preconfigured in the Contacts list,
the first line of the display shows De-Access Code:. The
second line of the display shows a blinking cursor. Enter the
deaccess code and press
g to proceed. The radio returns
to the previous screen.
OR
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
6 The DTMF tone sounds and the display shows Ending
Phone Call.
7 If successful:
A tone sounds and the display shows Call Ended. Your
radio returns to the Phone Call screen.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 5
or wait for the telephone user to end the call.
When the telephone user ends the call, a tone sounds and the
display shows Phone Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
NOTE: During channel access, press e to dismiss the call
attempt and a tone sounds.
During the call, when you press One Touch Access
button with the deaccess code preconfigured or enter
the deaccess code as the input for extra digits, your
radio attempts to end the call.
During channel access and access/deaccess code or
extra digits transmission, your radio responds to On/
Off button, Volume Knob, and Channel Rocker only.
A tone sounds for every invalid input.
The access or deaccess code cannot be more than 10
characters.
NAG.book Page 93 Thursday, January 3, 2013 3:15 PM