User's Manual

Keypad Microphone Features
English
91
5 The display shows Number:. The second line of the display
shows a blinking cursor. Use the keypad to enter a
telephone number and press
g to proceed.
If the access code was not preconfigured in the Contacts
list, the first line of the display shows Access Code:. The
second line of the display shows a blinking cursor. Enter the
access code and press g to proceed.
6 The green LED lights up. The Phone Call icon appears in
the top right corner. The first text line shows the subscriber
alias. The second text line displays the call status.
7 If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user. The first text line shows the subscriber alias.
The Phone Call icon remains in the top right corner.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
8 Press the PTT button to talk and release it to listen. The
To enter extra digits, if requested by the Phone Call:
Enter the extra digits using the keypad and press
g to
proceed. The DTMF tone sounds and the radio returns to
the previous screen.
9 Press e to end the call.
If deaccess code was not preconfigured in the Contacts list,
the first line of the display shows De-Access Code:. The
second line of the display shows a blinking cursor. Enter the
deaccess code and press g to proceed. The radio returns
to the previous screen.
OR
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
10 The DTMF tone sounds and the display shows Ending
Phone Call.
11 If successful:
A tone sounds and the display shows Call Ended. Your
radio returns to the Phone Call screen.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Steps 9
and 10 or wait for the telephone user to end the call.
When you press PTT button while in the Phone Contacts
screen, a tone sounds and the display shows Press OK to
Place Phone Call.
When the telephone user ends the call, a tone sounds and the
display shows Call Ended.
NAG.book Page 91 Thursday, January 3, 2013 3:15 PM