User's Guide
Table Of Contents
- English -- Product Safety and RF Exposure for Mobile Two-Way Radios Installed in Vehicles or as Fixed Site C...
- Español -- Normas de seguridad y exposición a la energía de RF al usar radios bidireccionales móviles instal...
- Português -- Normas de segurança e exposição à energia de RF ao se utilizar rádios bidirecionais móveis instal...
- Français -- Normes de sécurité et exposition à l’énergie RF pour l’utilisation des radios bidirectionnelles m...
5
English
Use only the Motorola-approved, supplied antenna or a Motorola-
approved replacement antenna. Use of non–Motorola-approved antennas,
modifications, or attachments could damage the radio and may violate FCC
regulations.
• For a list of Motorola-approved antennas, visit the following web site:
http://www.motorola.com/cgiss/index.shtml
.
For additional information on exposure requirements or other training
information, visit http://www.motorola.com/rfhealth
.
Compliance and Control Guidelines and Operating Instructions for
Mobile Two-Way Radios Installed as Fixed Site Control Stations
If mobile radio equipment is installed at a fixed location and operated as a control
station or as a fixed unit, the antenna installation must comply with the following
requirements in order to ensure optimal performance and compliance with the RF
energy exposure limits in the standards and guidelines listed on page 3:
• The antenna should be mounted outside the building on the roof or a tower if at
all possible.
• As with all fixed site antenna installations, it is the responsibility of the licensee
to manage the site in accordance with applicable regulatory requirements and
may require additional compliance actions such as site survey measurements,
signage, and site access restrictions in order to ensure that exposure limits are
not exceeded.
95C99-O.book Page 5 Tuesday, July 16, 2002 12:45 PM