User's Manual Part 1
Turn the Radio On or Off
1. Rotate the On/Off/Volume knob clockwise. You will hear the self-test pass tone
and see the display icons light momentarily and LED indicator flash green.
2. Rotate the On/Off/Volume knob counterclockwise until you hear a click
and both the display and the LED indicators turn off.
Adjust the Volume
1. Turn the On/Off/Volume knob clockwise to increase the volume, or coun-
terclockwise to decrease the volume.
Select a Radio Channel
1. turn the Channel Selector knob clockwise or counterclockwise until you
reach the desired channel.
Receive
1. Turn radio on and adjust volume to the desired level.
2. Select desired channel.
3. Listen for voice acitivity. The LED indicator flashes red while your radio is
receiving.
Transmit
1. Hold the radio vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press
the PTT button to talk. The LED indicator lights steady red while the call is
being sent.
2. Release PTT button to listen.
Start or Stop System Scan
1. Press the preprogrammed Scan button to start scan. – OR – L or M
to select a channel that contains a Scan list. From the Scan menu, select
SCAN ON. The LED indictor blinks green during scan operation.
2. Press the preprogramed Scan button again to stop scan. – OR – from the
Scan menu, select SCAN OFF.
Start or Stop Auto Scan
1. Select a channel that has been preprogrammed for Auto Scan by your
dealer/programmer.
2. Select a channel that has not been preprogrammed for Auto Scan by your
dealer/programmer.
Delete a Nuisance Channel During Scanning
1. While radio is on a nuisance channel, hold down preprogrammed Nui-
sance Delete button until you hear a tone.
2. Release Nuisance Delete button.
PR400
™
Quick Reference Card
Record the functions for your radio’s programmable buttons in the table
provided below. For further information, see page 12 of this User Guide.
P1
P2
1
2
3
4
5
6
7
8
9
*
0
#
Microphone/
PTT
LED
Indicator
Channel Selector Knob
On/Off/Volume Knob
Side Button 1
(Programmable)
Side Button 2
(Programmable)
Front Button P1
(Programmable)
Menu Scroll
Buttons
Front Button P2
(Programmable)
DTMF Keypad
Display
Speaker
Button Function Short Press Long Press Hold Down Page
10_QR-Card_full-keypad.fm Page 61 Thursday, August 7, 2003 11:40 AM