User's Manual Part 1

57
English
USER SETTINGS
SET SQUELCH LEVEL
Use this feature to filter out (unwanted) calls
and/or background noise. However, tightening
squelch could cause calls from remote
locations to be filtered out as well. In this case,
normal squelch may be more desirable.
Press the preprogrammed Squelch button
(see page 14) to toggle between tight and
normal squelch.
– or –
SET POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
• High power (S) allows you to reach a radio
that is farther away.
•Low power (R) to conserve the battery.
Note: The R or S symbol appears on the
display when High/Low Power Level is
selected.
To set the power level, press the
preprogrammed Power Level button (see
page 14) to toggle between low and high
power.
– or –
1 J to enter menu mode.
2 L or M until
3 J to select
4 L or M until
5 J to select
6 L or M until
– or – until
7 J to select the current setting.
UTILITY
UTILITY
SQUELCH
SQUELCH
NORMAL
TIGHT
1 J to enter menu mode.
2 L or M until
3 J to select
4 L or M until
5 J to select
UTILITY
UTILITY
PWR LVL
PWR LVL
07_Utilities.fm Page 57 Thursday, August 7, 2003 11:32 AM