User's Guide
Table Of Contents
- Product Safety and RF Energy Exposure Booklet for Portable Two-Way Radios
- Folleto de normas de seguridad y exposición a la energía de RF al usar radios bidireccionales por...
- Folheto de normas de segurança e de exposição à energia de RF quando do uso de rádios portáteis b...
- Informações sobre a exposição à energia de RF e seu controle, e instruções operacionais para o us...
- Interferência e compatibilidade eletromagnética
- Precauções operacionais
- Informações sobre rádios intrinsecamente seguros
- Brochure sur la sécurité du produit et sur l’exposition à l’énergie de RF pour les radios mobiles...
4
English
Your Motorola two-way radio complies with the following RF energy
exposure standards and guidelines:
• United States Federal Communications Commission, Code of Federal
Regulations; 47CFR part 2 sub-part J
• American National Standards Institute (ANSI) / Institute of Electrical and
Electronic Engineers (IEEE) C95. 1-1992
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to
Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to
300 GHz, 1999
• Australian Communications Authority Radiocommunications (Electromagnetic
Radiation – Human Exposure) Standard, 2003
• ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limitation
of exposure to electrical, magnetic and electromagnetic fields in the radio
frequency range between 9 KHz and 300 GHz" and "Attachment to resolution #
303 from July 2, 2002"
RF Exposure Compliance and Control Guidelines and Operating
Instructions
To control your exposure and ensure compliance with the occupational/controlled
environment exposure limits, always adhere to the following procedures.
Guidelines:
• Do not remove the RF Exposure Label from the device.
• User awareness instructions should accompany device when transferred to
other users.
• Do not use this device if the operational requirements described herein are not
met.